What Is the P0801 Purpose Code?

The P0801 purpose code covers money received from abroad for hardware consultancy and hardware implementation services. RBI lists P0801 in group 08, Telecommunication, Computer & Information Services, with the words "Hardware consultancy/implementation". In plain terms, P0801 is for advice, specification, installation and rollout work on computer hardware that you deliver as a service. AD banks report every foreign exchange transaction with a purpose code under FETERS, as set out in A.P. (DIR Series) Circular No. 84 of February 29, 2012. Regulation 18(2) of the 2026 Export and Import Regulations keeps this FETERS reporting in place.

P0801 vs P0802: P0802 is "Software consultancy/implementation (other than those covered in SOFTEX form)" in the same RBI group. The difference is the subject of the work. P0801 fits hardware such as servers and networking equipment, and P0802 fits software. See the page on P0802. If one engagement covers both, ask your AD bank how to record it.

Use the P0801 purpose code when a foreign client pays you for hardware consultancy or hardware implementation services. Typical cases are advising a client on server or network equipment, designing a hardware setup, and supervising its installation. The deciding question is what your invoice and contract describe. If they describe hardware consulting or implementation, P0801 fits. The code you pick from the RBI purpose code list should match the invoice wording.

• Use P0802 instead: Use P0802 (Software consultancy/implementation (other than those covered in SOFTEX form)) when the work is on software and not on hardware.
• Use P0804 instead: Use P0804 (Repair and maintenance of computer and software) when the client pays for repair or maintenance under a support arrangement.
• Use P1006 instead: Use P1006 (Business and management consultancy and public relations services) when the advice is about business strategy or management and is not hardware work.

The P0801 purpose code is used by Indian residents who sell hardware consulting or installation services to clients outside India, such as independent IT infrastructure consultants, network design specialists and small IT services firms. The Indian recipient of the payment declares the code with the AD bank or payment provider that credits the foreign currency.

• For example, an infrastructure consultant in Hyderabad is paid by a Singapore company for designing the server room layout for its new office and declares P0801.
• For example, an IT firm in Chennai bills a UK client for supervising the rollout of networking equipment across the client's sites.
• For example, a freelance systems engineer in Pune is paid by a German startup to specify and plan a hardware upgrade for its data centre.
• For example, a consultant in Noida receives a fee from a US distributor for advising on which computer hardware suits its warehouse operations.

• The client pays for software consulting, setup or integration. Use P0802 (Software consultancy/implementation (other than those covered in SOFTEX form)).
• The payment is for repair or maintenance of computer systems under a support contract. Use P0804 (Repair and maintenance of computer and software).
• The client pays for database or data processing work. Use P0803 (Data base, data processing charges).
• The payment is for general business or management advice. Use P1006 (Business and management consultancy and public relations services).

For the P0802 purpose code, the core documents are the invoice, the contract or engagement letter, and an Export Declaration Form (EDF). Under Regulation 3(2) of the 2026 Export and Import Regulations, in force from October 01, 2026, an exporter of services must furnish an EDF giving the full export value within 30 days from the end of the month in which the invoice was raised. This changes the earlier rule in paragraph B.7 of the now superseded Master Direction, which let services without a specified form be exported without any declaration.

• Invoice: Raise an invoice that names the foreign client, describes the hardware consultancy or implementation services, and shows the amount and currency.
• Contract: Keep the contract, statement of work, purchase order or engagement email that shows what you agreed to deliver.
• EDF: File the Export Declaration Form with the specified authority. Under Regulation 2(1)(f), this is an Authorised Dealer or STPI in the DTA for software, an Authorised Dealer in the DTA for other services, and the SEZ Development Commissioner in an SEZ. One EDF can cover all services exported in a month. Ask your AD bank which category your work falls in.
• Small invoices: Under Regulation 4(2), for invoices up to ₹10 lakh, the AD bank may close the export entry in EDPMS based on your declaration that the payment has been realised.
• Bank requests: Your AD bank may ask for KYC details, the remitter's details, or a short note confirming the purpose. Check with your AD bank for its exact list.

1. Check the invoice and contract to confirm the payment is for hardware consultancy or implementation services.
2. Open the inward payment in your bank or payment provider's portal, app or branch form when the foreign currency arrives or when you are asked for the purpose.
3. Select P0801 from the purpose code list, or write the code and its description if the form asks for text.
4. Attach or keep ready the invoice, contract and Export Declaration Form, and add the invoice number in any remarks field so the payment can be matched.
5. Confirm the code shown on the credit advice or inward remittance certificate is P0801, and ask your bank or payment provider to correct it if it is wrong.

• FIRA/FIRC: The inward remittance advice or certificate your bank or payment provider issues normally records the purpose of the payment, so the code you declare follows the payment into your records. Keep these documents with the matching invoice. Check with your AD bank on the exact format it issues.
• GST status: A hardware consultancy or implementation service can be an export of services if all five conditions in section 2(6) of the IGST Act are met: supplier in India, recipient outside India, place of supply outside India, payment in convertible foreign exchange or in rupees where RBI permits, and the two parties are not merely establishments of the same person.
• Zero rating: Export of services is a zero rated supply under section 16(1)(a) of the IGST Act, and input tax credit may be availed for it under section 16(2).
• LUT: Section 16(3) allows a registered person to make zero rated supplies without payment of integrated tax under bond or Letter of Undertaking. The LUT is filed as FORM GST RFD-11 on the GST portal.
• Income tax: The purpose code does not change how the income is taxed. The fees are part of your income and are reported in your return. The Income-tax Act, 2025 replaced the 1961 Act from 01.04.2026 and uses the term tax year. Take advice from a tax professional on the correct head and return form.
• Realisation: Under Regulation 5(1)(a) of the 2026 Regulations, the export value of services must be realised and repatriated within nine months from the date of invoice, or twelve months where the export is invoiced or settled in Indian rupees. The September 22, 2026 amendment cut these from fifteen and eighteen months. Your AD bank may extend the period on request.

• Code mix-up: Declaring P0801 for software work, where P0802 is usually the matching code.
• Wrong group: Choosing P1006 (business and management consultancy) for hardware work because the invoice says consulting.
• Catch-all code: Using P1099 (Other services not included elsewhere) when a specific code such as P0801 describes the service.
• Personal codes: Selecting a transfer code such as P1301 (family maintenance) for business fees, which misstates the nature of the receipt.
• Invoice mismatch: Writing an invoice description that does not match the code, for example billing "design support" while declaring P0801.
• No EDF: Skipping the Export Declaration Form. From October 01, 2026, Regulation 3(2) requires one for services within 30 days from the end of the invoice month.

The code, its official description and every rule on this page are linked to RBI and other official sources, checked on the dates below.

1. RBI: Guidelines for Submission of Data, Foreign Exchange Transactions Electronic Reporting System (FETERS), purpose code list for receipts, Annex purpose codes, receipts, Group 08 Telecommunication, Computer & Information Services (P0801 to P0809); Group 03 Travel (P0301 to P0308); Group 10 P1006, P1099; Group 13 P1301 (checked 9 Oct 2026)
2. RBI A.P. (DIR Series) Circular No. 84 dated February 29, 2012: Compilation of R-Returns, Reporting under FETERS, Paragraph 3: AD banks to report all foreign exchange transactions as per the revised purpose code list from April 2012 (checked 9 Oct 2026)
3. RBI Notification No. FEMA 23(R)/2026-RB: Foreign Exchange Management (Export and Import of Goods and Services) Regulations, 2026 (amended up to September 22, 2026), Regulation 1(2) (in force from October 01, 2026); 2(1)(f) (specified authority); 3(2) (EDF for services within 30 days from end of invoice month); 4(2) (EDPMS closure up to ₹10 lakh); 5(1)(a) (nine months from invoice date, as amended on September 22, 2026); 18(2) (FETERS reporting) (checked 9 Oct 2026)
4. RBI A.P. (DIR Series) Circular No. 20 dated January 16, 2026: Export and Import of Goods and Services, Paragraphs 4 and 7 and Annex A: Master Direction on Export of Goods and Services and listed circulars, including the SOFTEX circulars, superseded from October 01, 2026 (checked 9 Oct 2026)
5. RBI: Export Declaration Form, Annex to the 2026 Regulations, Part 2B (details of services provided to multiple recipients) and Part 5 (certification by Custom, SEZ, Authorised Dealer or STPI) (checked 9 Oct 2026)
6. RBI Master Direction: Export of Goods and Services (updated as on July 17, 2026; superseded from October 01, 2026), Superseded from October 01, 2026; cited only to explain the earlier rule in paragraph B.7 (export of services without a specified form) (checked 9 Oct 2026)
7. IGST Act, 2017, Section 2: Definitions (CBIC tax information portal), Section 2(6): definition of export of services (checked 9 Oct 2026)
8. IGST Act, 2017, Section 16: Zero rated supply (CBIC tax information portal), Section 16(1)(a), 16(2) and 16(3): zero rated supply, input tax credit, supply under bond or Letter of Undertaking (checked 9 Oct 2026)
9. GST Portal user manual: Furnishing of Letter of Undertaking (FORM GST RFD-11), Filing path Services > User Services > Furnish Letter of Undertaking (LUT) (checked 9 Oct 2026)
10. Income Tax Department e-filing portal: Objective and scope of the New Act, Repeal of the 1961 Act on 01.04.2026 and the tax year concept (checked 9 Oct 2026)